Specifications
Vector Pro specifications
Every published specification for the Vector Pro residential elevator in one table.
| Rated load | 400 kg (5 person) |
|---|---|
| Rated speed | 0.25 m/s |
| Travel | 10 m · up to 4 stops |
| Headroom | 2300 mm (reduced model 2100 mm) |
| Pit depth | 120 mm |
| Drive | Hydraulic |
| Motor | Submerged worm screw hydraulic |
| Machine room | None · small pump cupboard |
| Noise (showroom unit) | 42 dB measured |
| Current draw | Around 14 A (varies by configuration) |
| Power | Single phase 230VAC |
| Cabin sizes | 750 × 700 to 1100 × 1350 mm |
| Doors | Swing doors (manual standard, automatic options) |
| Wheelchair friendly | Yes |
| Installation | 1–2 weeks |
| Warranty | 5 Year Parts Warranty |
| Max travel | 10 m, up to 4 stops |
| Drive type | Hydraulic |
| Noise level | 42 dB (measured on our showroom unit) |
| Door type | Swing doors: Manual Single Swing (standard), Automatic Single Swing, Automatic Centre Swing |
| Cabin type | Closed Cabin / Platform Cabin |
| Power supply | Single Phase 230VAC |
| Standard cabin sizes | 750 x 700 mm to 1100 x 1350 mm |
| Bespoke sizing | Complete Bespoke Sizing Available |
| Customisation | Yes |
Doors options: Manual single swing (standard), Automatic single swing, Automatic centre swing.
Cabin options: Closed cabin, Platform cabin, Bespoke sizing, Customisable finishes.
See the Vector Pro page → · Other specs: Zenith Ultra · Zenith DDA · Atlus
FAQs
Vector Pro questions
How much space does the Vector Pro need?
The Vector Pro is designed to be compact, often fitting into the space of a standard closet. We offer a free consultation to assess your home's specific needs.
What pit does the Vector Pro need?
The Vector Pro needs a pit of just 120 mm.
How far can the Vector Pro travel?
The Vector Pro travels up to 10 m and serves up to 4 stops, with cabins up to 1100 × 1350 mm.
Does the Vector Pro need a machine room?
No. Thanks to its submerged worm screw hydraulic motor, the pump needs only a small cupboard, with no machine room.
Is the Vector Pro noisy, or does it smell of oil?
No. The Vector Pro is one of the quietest hydraulic lifts in the Australian market, with no loud noise: our showroom unit measured 42 dB. Its leak-proof ram design means zero leaks, spills or odours, so there is no oil smell.
What power does the Vector Pro need?
Single phase 230VAC, like all our home elevators. It draws around 14 A depending on configuration, less than the standard 32 A typical of electric traction. Only the E1 commercial lift needs three phase power.
Is the Vector Pro wheelchair friendly?
Yes. Standard cabins range from 750 × 700 mm to 1100 × 1350 mm, with complete bespoke sizing available. Raise wheelchair access at the first site visit so the cabin is specified for it from the start.
What happens if the power goes out?
Home lifts have a battery backup that brings the car to the nearest landing and opens the door, so nobody is left sitting in a stopped lift.
What maintenance is required?
We recommend a minimum of one service per year, twice-yearly for heavily used lifts, or as outlined by the manufacturer's servicing schedule.
How long does installation take?
Installation of the Vector Pro typically takes 1–2 weeks.
Want a Vector Pro quote?
Book a free consultation and we'll check your space.